This is a Red Level tool and requires specific training to use.

• Demonstrate proper blade height
• Demonstrate proper body position
• Demonstrate proper dust collection
• Demonstrate how to turn on and off the machine and check that the saw stop function is enabled
• Demonstrate rip cut with push sticks
• Demonstrate cross cut with miter gauge

• Any unauthorized attempt to disable the saw stop functionality will result in disciplinary action
• Any use of the table saw which results in the SawStop triggering will result in a $100 fee assessed the member. The table saw will be placed out of order until the cartridge and blade can be replaced.
• Thinnest rip cut is 1/4 inch between the blade and fence
• Push sticks are required between the miter slots
• Miter gauge is required for cross cuts
• Banned Materials (these are all known to trigger the SawStop)
  • Wet wood
  • Reclaimed wood
  • Pressure treated wood
  • Laser etched wood
  • Non wood materials
  • No staples in the wood
  • If you are unsure, ask before you attempt

• Unplugged
• Blade down

• Eye Protection
• Ear Protection

• SawStop PCS175 10” Cabinet (Table) Saw
  • Manualsawstop_pcs-175.pdf