The Bandsaw is a Red Level Tool and requires Tool Specific Training

1. Ensure the work area is clean and free of debris
2. Select the appropriate blade for your material (tooth pitch, blade material)
3. Adjust the blade speed to match the material (lower speeds for harder materials)
4. Secure the material firmly in the vise, ensuring it's perpendicular to the blade
5. Position the blade guide as close to the workpiece as possible
6. Use push sticks or handling tools when working with small pieces
7. Support long pieces with roller stands or other appropriate supports
8. Start the machine and allow it to reach full speed before beginning the cut
9. Allow the machine to complete the cut without forcing or rushing
10. In case of binding or jamming, stop the machine immediately
11. Replace blades when dull or damaged
12. Store blades properly when not in use

1. Check the blade for cracks, missing teeth, or damage
2. Ensure blade tension is proper according to manufacturer specifications
3. Verify all guards are in place and functioning
4. Check that the blade guides and support bearings are properly adjusted

1. Clean the machine after each use
2. Remove chips and debris from the blade and work area

1. Lubricate moving parts according to manufacturer recommendations
2. Verify blade tension

1. Check and adjust blade tracking
2. Inspect and replace worn blade guides
3. Check drive belt for condition