lathe_tooling
Table of Contents
Lathe Tooling
Tool Holding
- BXA Wedge-type toolpost on Solid Toolpost Block (Compound slide stored behind lathe)
- 1/2“ max tool shank regular holders
- 5/8” - 3/4“ diameter boring bar holder
- 1/2” parting blade holder
Tail Stock Tooling
- Quill taper is Morse Taper 3 (MT3)
- Live center (with interchangeable tips)
- Drill Chuck (1/2“ max drill bit shank)
Work Holding
- 3-jaw scroll chuck
- Reversible Jaws
- Remove 2 bolts from each jaw to remove
- Jaws are numbered, please don't mix them up
- 4-jaw independent chuck
- Reversible Jaws
- Unscrew each jaw all the way, flip, reinsert.
lathe_tooling.txt · Last modified: by chris_santacroce