Differences

This shows you the differences between two versions of the page.

--- wood_shop [2025/06/20 17:20] – [Red Level Equipment] samuel_sullivan
+++ wood_shop [2025/07/15 16:59] (current) – samuel_sullivan
@@ Line 6: / Line 6: @@
   - Food or drinks are strictly prohibited in the shop.
   - Return each tool to its storage location.
-  - All machinery equipped with dust collection MUST engage the designated dust collector while in operation.
+  - Proper dust remediation is required at all times.
+    - Exhaust fan turned on
+    - Doors closed
+    - If tool is equipped with a dust collector
+      - Dust collector turned on
+      - Gate to specific tool open
   - Do not leave any operating tool unattended.
   - Properly support all material while cutting/shaping.
@@ Line 19: / Line 24: @@
     - Rings
     - Watches
-    - Gloves of any kind, including latex/nitrile gloves.
+    - Gloves of any kind, including latex/nitrile gloves while operating machinery
 ==== Shop Policy and Courtesy ====
   - Clean up after yourself before you leave or if your debris interferes with another.
-  - If a piece of material is marked, cut your stock off the end opposite the mark.
+    - Take bagged trash to the outdoor bins if the garbage can is 3/4 full or greater.
+    - Additional trash bags are located in the cleaning supplies closet between the wood shop and sink
+    - Do not use brooms from other shop areas in the wood shop. Use brooms designated for the wood shop only.
   - Do not use grinding equipment of any kind on workpieces in machines.
   - Use correct PPE as appropriate.
@@ Line 43: / Line 50: @@
 ==== Red Level Equipment ====
 These machines require specific training before use.
+===Open===
+These tools are open and trainings are being offered. Speak with a shop captain to get orientations scheduled.
   * [[miter_saws|Miter Saws]]
   * [[jointer|Jointer]]
@@ Line 48: / Line 57: @@
   * [[scroll_saw|Scroll Saw]]
   * [[table_saw|Table Saw]]
-  * [[router_table|Rockler SL Router Table with Dewalt DWP611 Router]]
+  * [[router_table|Router Table]]
+  * [[drum_sander|Drum Sander]]
+These tools are open, but trainings are not prepared. Speak with a shop captain if these tools are desired and we will prioritize a training checklist.
   * [[hand_planer|Dewalt D26676 Electric Hand Planer]]
   * [[routers|Routers]]
   * [[angle_grinders|Angle Grinders]]
   * [[circular_saws|Circular Saws]]
-  * [[drum_sander|SuperMax 16-32 Drum Sander]]
   * [[bench_grinder_wood_shop|Manning-Bowman 71510 6” Bench Grinder]]
-  * (Coming Soon) [[cnc_router|CNC Router (Shapeoko XL 4)]]
+  * [[sawzall|Milwaukee Super Sawzall 6537-22]]
-  * (Coming Soon) [[band_saw|Ryobi BS904G Band Saw]]
-  * (Coming Soon) [[sawzall|Milwaukee Super Sawzall 6537-22]]
+===Coming Soon===
-  * (Coming Later) Lathe
+  * [[cnc_router|CNC Router (Shapeoko XL 4)]]
+  * [[band_saw|Ryobi BS904G Band Saw]]
+===Coming later===
+  * Lathe