Differences

This shows you the differences between two versions of the page.

--- elegoo_mars_1 [2025/05/22 18:44] – [Machine Profile] nick_dunne
+++ elegoo_mars_1 [2025/05/22 19:22] (current) – [Elegoo Mars 1] nick_dunne
@@ Line 1: / Line 1: @@
 ====== Elegoo Mars 1 ======
-MSLA (Masked Stereolithography Apparatus) resin 3D printer. {{ :elegoo_mars_1.png?400|}}
+MSLA (Masked Stereolithography Apparatus) resin 3D printer. {{ :elegoo_mars_1.png?300|}}
 The Elegoo Mars is a compact resin 3D printer renowned for its ease of use and affordability, making it an excellent choice for makers seeking detailed prints. Utilizing masked stereolithography (MSLA) technology, it employs ultraviolet light to cure liquid resin layer by layer, resulting in finely detailed models. The printer features a simple touchscreen interface and uses Chitubox slicer.
@@ Line 20: / Line 20: @@
 [[https://drive.google.com/file/d/1j-cYnGjidCQNpUMnnxv7y7xm-a4ZRZOl/view?usp=sharing|Elegoo Mars 1 User Manual]]
+\\
 ----
@@ Line 64: / Line 66: @@
 Machine profiles are available inside the slicer.
+\\
+===== Material Profiles =====
 When using a new resin, it is recommended to calibrate the exposure time. Exposure times vary per resin and per resin color.
@@ Line 69: / Line 73: @@
 [[https://docs.google.com/spreadsheets/d/1A0nKRrU1HE6Lr4eXwR_1obeMO97p1SA6/edit?usp=sharing&ouid=104870357465174117004&rtpof=true&sd=true|Elegoo 3D Printer Resin Settings]]
-===== Material Profiles =====
-The material profiles include per-material settings including temperature, speeds, and shrink rates.
-These files are only necessary if the materials are not present in your software. Check back here occasionally for more materials!
-{{ :generic_pla_.zip | PLA Material Bundle}}
 \\
-{{ :generic_petg.zip | PETG Material Bundle}}
+----
+===== Resin Calibration =====
+The following calibration object is recommended for quickly dialing in exposure times.
+\\ Instructions for use and video demonstration are linked in the Printables description.
+{{:validationmatrix.png?400|}}
+__**Printables Download & Instructions:**__ [[https://www.printables.com/model/229429-photonsters-validation-matrix-v2| Validation Matrix]]
 ----
@@ Line 83: / Line 90: @@
 ====== Maintenance Log ======
-  * __**5/15/2025: General Maintenance**__
+  * __**5/15/2025: Service Entry Maintenance**__
-      * Adjusted Z-Axis belt timing
+      * Unpacked printer
-      * Performed mechanical bed tramming
+      * Inspected build plate, vat, and release film
-      * Added desiccant packs to AMS
+      * Powered on
-      * Cleaned bottom of printer and removed excess grease
+      * Successful test pattern
-      * Ran self-calibration
-      * Purged SD card