Differences

This shows you the differences between two versions of the page.

--- elegoo_mars_1 [2025/05/22 18:25] – [Troubleshooting] nick_dunne
+++ elegoo_mars_1 [2025/05/22 19:22] (current) – [Elegoo Mars 1] nick_dunne
@@ Line 1: / Line 1: @@
 ====== Elegoo Mars 1 ======
-MSLA (Masked Stereolithography Apparatus) resin 3D printer. {{ :elegoo_mars_1.png?400|}}
+MSLA (Masked Stereolithography Apparatus) resin 3D printer. {{ :elegoo_mars_1.png?300|}}
 The Elegoo Mars is a compact resin 3D printer renowned for its ease of use and affordability, making it an excellent choice for makers seeking detailed prints. Utilizing masked stereolithography (MSLA) technology, it employs ultraviolet light to cure liquid resin layer by layer, resulting in finely detailed models. The printer features a simple touchscreen interface and uses Chitubox slicer.
@@ Line 20: / Line 20: @@
 [[https://drive.google.com/file/d/1j-cYnGjidCQNpUMnnxv7y7xm-a4ZRZOl/view?usp=sharing|Elegoo Mars 1 User Manual]]
+\\
 ----
@@ Line 62: / Line 64: @@
 ----
 ===== Machine Profile =====
-The machine profile includes configuration files for the printer, as well as print process and material settings.
+Machine profiles are available inside the slicer.
-{{ :bambu_lab_x1_carbon_0.4_nozzle_-_make_roanoke.orca_printer.zip | Bambu Lab X1 Carbon Profile}}
+\\
 ===== Material Profiles =====
-The material profiles include per-material settings including temperature, speeds, and shrink rates.
+When using a new resin, it is recommended to calibrate the exposure time. Exposure times vary per resin and per resin color.
-These files are only necessary if the materials are not present in your software. Check back here occasionally for more materials!
+To find recommended exposure times, find your printer and resin combination in the spreadsheet below.
+[[https://docs.google.com/spreadsheets/d/1A0nKRrU1HE6Lr4eXwR_1obeMO97p1SA6/edit?usp=sharing&ouid=104870357465174117004&rtpof=true&sd=true|Elegoo 3D Printer Resin Settings]]
-{{ :generic_pla_.zip | PLA Material Bundle}}
 \\
-{{ :generic_petg.zip | PETG Material Bundle}}
+----
+===== Resin Calibration =====
+The following calibration object is recommended for quickly dialing in exposure times.
+\\ Instructions for use and video demonstration are linked in the Printables description.
+{{:validationmatrix.png?400|}}
+__**Printables Download & Instructions:**__ [[https://www.printables.com/model/229429-photonsters-validation-matrix-v2| Validation Matrix]]
 ----
@@ Line 79: / Line 90: @@
 ====== Maintenance Log ======
-  * __**5/15/2025: General Maintenance**__
+  * __**5/15/2025: Service Entry Maintenance**__
-      * Adjusted Z-Axis belt timing
+      * Unpacked printer
-      * Performed mechanical bed tramming
+      * Inspected build plate, vat, and release film
-      * Added desiccant packs to AMS
+      * Powered on
-      * Cleaned bottom of printer and removed excess grease
+      * Successful test pattern
-      * Ran self-calibration
-      * Purged SD card