Differences

This shows you the differences between two versions of the page.

--- electronics_lab [2025/02/20 01:40] – created hristo_asenov
+++ electronics_lab [2025/05/19 00:23] (current) – stan_okrasinski
@@ Line 1: / Line 1: @@
 ====== Electronics Lab ======
-===== DC Power Supplies =====
+The electronics lab is captained by Stan Okrasinski
+Discord: @sokrasins
+Email: stan@makeroanoke.org
+==== General Lab Safety ====
+  - Members must have completed MAKE Roanoke's new member orientation before using the electronics lab.
+  - No food or drinks are permitted in the 3D printing, laser, or electronics labs.
+  - Don't throw batteries away in the maker space
+  - Much of the equipment in electronics is considered a "yellow" tool, meaning shop orientation and safety training must be completed prior to use. The equipment is labeled to indicate it's level. If a tool is unlabled, it is considered green.
+If you'd like to review the orientation material, see the [[elec_orientation_guide|electronics orientation guide]]
+==== Equipment ====
+The Electronics shop offers equipment in three main categories:
+  - Soldering tools
+  - Test and measure equipment
+  - Components and project materials
+=== Test and Measure Equipment ===
+== DC Power Supply ==
   * Extech 382213
-===== Oscilloscopes =====
+== Oscilloscopes ==
   * Rigol DS1102E
   * LeCroy 9345M
-===== Soldering =====
+=== Soldering Tools ===
+== Irons ==
   * Aoyue 9378
+  * JBC CD-1E
   * Miniware TS100/101 (2X)
+== Hot Air Station ==
+  * Quick 861DW
+== Reflow Oven ==
   * Gold-Flow 12 Reflow Oven