Differences

This shows you the differences between two versions of the page.

--- creality_space_pi_filament_dryer [2025/06/13 00:09] – nick_dunne
+++ creality_space_pi_filament_dryer [2025/06/13 00:51] (current) – [Machine Limits] nick_dunne
@@ Line 6: / Line 6: @@
 The chambers have exhaust fans which actively remove humidity from the chamber during the dry cycle. Desiccant is still recommended for best results.
-===== Machine Specifications =====
+===== Machine Limits =====
   * Maximum temperature: 85°C
+  * Maximum dry cycle: 48 hours
+----
 ===== Material Drying Settings =====
-  * PLA
+^  Material  ^  Drying Temperature  ^  Drying Time  ^
-  * PETG
+|  PLA  |  50°C  |   4 to 6 hours  |
-  * ABS
+|  PETG  |  70°C  |   4 to 8 hours  |
-  * ASA
+|  TPU  |  50°C  |   4 to 8 hours  |
-  * PA6
-  * TPU (external spool only - no AMS support)
-  * Composites (external spool only - no AMS support)
@@ Line 25: / Line 24: @@
 ====== Documentation ======
-[[https://wiki.bambulab.com/en/x1|Official Bambu Lab Wiki]]
+[[https://drive.google.com/file/d/1FZridiDVrAsXZNVF-6YcjQf50sPsFQ1g/view?usp=drive_link | Space Pi X4 User Manual]]
 ----
-====== Software & Files ======
+====== Maintenance Log ======
+  * __**6/12/2025: New Equipment Service Entry**__
+      * Unpacked filament dryer and ran test cycle