Differences

This shows you the differences between two versions of the page.

--- 3d_printing [2025/05/23 15:05] – [Resin Printer (SLA/DLP) Policy] nick_dunne
+++ 3d_printing [2025/06/13 00:59] (current) – [Shop Announcements] nick_dunne
@@ Line 8: / Line 8: @@
 ====== Shop Announcements ======
-  * **5/22/25:** Elegoo resin printers are now available for training and use!
+  * **6/12/2025: New equipment and materials available!**
+    * Creality Space Pi X4 Filament Dryer
+    * Filament storage vacuum bags & pump
+    * Community PETG- multiple colors
+    * Scribe3D 3D pen
+  * **5/22/2025:** Elegoo resin printers are now available for training and use!
 ===== General Lab Safety =====
@@ Line 134: / Line 141: @@
   - __Use only printer-compatible materials__ - Some engineering-grade resins cannot be printed on our machines, since they require heated vats or stirring.
   - __Finished prints__ - Finished prints must be removed within 1 hour of completion for post-processing. Members are encouraged to let prints drip for 30 minutes to reduce washing effort and IPA contamination.
-  - __Use resin-specific hand tools__ - Tools used for resin post-processing should not leave the resin printing station, in effort to contain residue. Tools from other areas in the shop may not be borrowed. These tools are marked with yellow bands or labels, and belong in the yellow bin.
+  - __Use resin-specific hand tools in the yellow bucket__ - Tools used for resin post-processing should not leave the resin printing station, in effort to contain residue. Tools from other areas in the shop may not be borrowed. These tools are marked with yellow bands or labels, and belong in the yellow bin.
@@ Line 158: / Line 165: @@
   * [[elegoo_mercury_wash_cure_station| Elegoo Mercury X Wash & Cure Station]]
   * [[sunlu_s1| Sunlu S1 Filament Dryer]]
+  * [[creality_space_pi_filament_dryer| Creality Space Pi X4 Filament Dryer]]
 ----