MAKE Roanoke Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Table Saw ======
This is a Red Level tool and requires specific training to use.

===== Training Checklist =====
  * Demonstrate proper blade height
  * Demonstrate proper body position
  * Demonstrate proper dust collection
  * Demonstrate how to turn on and off the machine and check that the saw stop function is enabled
  * Demonstrate rip cut with push sticks
  * Demonstrate cross cut with miter gauge

===== Tool Restrictions =====
  * Any unauthorized attempt to disable the saw stop functionality will result in disciplinary action
  * Any use of the table saw which results in the SawStop triggering will result in a $100 fee assessed the member. The table saw will be placed out of order until the cartridge and blade can be replaced.
  * Thinnest rip cut is 1/4 inch between the blade and fence
  * Push sticks are required between the miter slots
  * Miter gauge is required for cross cuts
  * Banned Materials (these are all known to trigger the SawStop)
    * Wet wood
    * Reclaimed wood
    * Pressure treated wood
    * Laser etched wood
    * Non wood materials
    * No staples in the wood
    * If you are unsure, ask before you attempt


===== Proper Storage =====
  * Unplugged
  * Blade down
  * Dust collection off and gate closed
===== Required PPE =====
  * Eye Protection
  * Ear Protection

===== Tools =====
==== SawStop Table Saw====

  * SawStop PCS175 10” Cabinet (Table) Saw
    * Manual{{ :shops:wood_shop:sawstop_pcs-175.pdf |}}