MAKE Roanoke Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Electronics Lab ======

The electronics lab is captained by Stan Okrasinski

Discord: @sokrasins

Email: stan@makeroanoke.org

==== General Lab Safety ====

  - Members must have completed MAKE Roanoke's new member orientation before using the electronics lab.
  - No food or drinks are permitted in the 3D printing, laser, or electronics labs.
  - Don't throw batteries away in the maker space
  - Much of the equipment in electronics is considered a "yellow" tool, meaning shop orientation and safety training must be completed prior to use. The equipment is labeled to indicate it's level. If a tool is unlabled, it is considered green.

If you'd like to review the orientation material, see the [[elec_orientation_guide|electronics orientation guide]]

==== Equipment ====

The Electronics shop offers equipment in three main categories:

  - Soldering tools
  - Test and measure equipment
  - Components and project materials

=== Test and Measure Equipment ===

== DC Power Supply ==

  * Extech 382213

== Oscilloscopes ==

  * Rigol DS1102E
  * LeCroy 9345M

=== Soldering Tools ===

== Irons ==

  * Aoyue 9378
  * JBC CD-1E
  * Miniware TS100/101 (2X)

== Hot Air Station ==

  * Quick 861DW

== Reflow Oven ==

  * Gold-Flow 12 Reflow Oven