MAKE Roanoke Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Delta 28-560 Bandsaw ======
The Bandsaw is a Red Level Tool and requires Tool Specific Training
====General====

  - Ensure the work area is clean and free of debris
  - Select the appropriate blade for your material (tooth pitch, blade material)
  - Adjust the blade speed to match the material (lower speeds for harder materials)
  - Secure the material firmly in the vise, ensuring it's perpendicular to the blade
  - Position the blade guide as close to the workpiece as possible
  - Use push sticks or handling tools when working with small pieces
  - Support long pieces with roller stands or other appropriate supports
  - Start the machine and allow it to reach full speed before beginning the cut
  - Allow the machine to complete the cut without forcing or rushing
  - In case of binding or jamming, stop the machine immediately
  - Replace blades when dull or damaged
  - Store blades properly when not in use

===Before use===
  - Check the blade for cracks, missing teeth, or damage
  - Ensure blade tension is proper according to manufacturer specifications
  - Verify all guards are in place and functioning
  - Check that the blade guides and support bearings are properly adjusted

===After Use=== 
  - Clean the machine after each use
  - Remove chips and debris from the blade and work area

====Maintenance====
===Weekly===
  - Lubricate moving parts according to manufacturer recommendations
  - Verify blade tension 
===Monthly===
  - Check and adjust blade tracking
  - Inspect and replace worn blade guides
  - Check drive belt for condition