Differences

This shows you the differences between two versions of the page.

--- wood_shop [2025/06/16 20:48] – [Red Level Equipment] samantha_sullivan
+++ wood_shop [2025/12/09 16:48] (current) – [Yellow Level Equipment] samuel_sullivan
@@ Line 6: / Line 6: @@
   - Food or drinks are strictly prohibited in the shop.
   - Return each tool to its storage location.
-  - All machinery equipped with dust collection MUST engage the designated dust collector while in operation.
+  - Proper dust remediation is required at all times.
+    - Exhaust fan turned on
+    - Doors closed
+    - If tool is equipped with a dust collector
+      - Dust collector turned on
+      - Gate to specific tool open
   - Do not leave any operating tool unattended.
   - Properly support all material while cutting/shaping.
@@ Line 19: / Line 24: @@
     - Rings
     - Watches
-    - Gloves of any kind, including latex/nitrile gloves.
+    - Gloves of any kind, including latex/nitrile gloves while operating machinery
 ==== Shop Policy and Courtesy ====
   - Clean up after yourself before you leave or if your debris interferes with another.
-  - If a piece of material is marked, cut your stock off the end opposite the mark.
+    - Take bagged trash to the outdoor bins if the garbage can is 3/4 full or greater.
+    - Additional trash bags are located in the cleaning supplies closet between the wood shop and sink
+    - Do not use brooms from other shop areas in the wood shop. Use brooms designated for the wood shop only.
   - Do not use grinding equipment of any kind on workpieces in machines.
   - Use correct PPE as appropriate.
@@ Line 41: / Line 48: @@
   * [[belt_sander|Belt & Disc Sander]]
   * [[diamond_grinder|Diamond Grinder]]
+  * [[dremel|Dremel Rotary Tool]]
 ==== Red Level Equipment ====
 These machines require specific training before use.
-  * [[metabo_compound_miter_saw|Metabo C10FCG(S) 10” Compound Miter Saw]]
+===Open===
-  * [[ryobi_miter_saw|Ryobi TSS103T Miter Saw]]
+These tools are open and trainings are being offered. Speak with a shop captain to get orientations scheduled.
-  * [[delta_jointer|Delta 37-190 Jointer]]
+  * [[miter_saws|Miter Saws]]
-  * [[dewalt_planer|Dewalt DW733 Planer]]
+  * [[jointer|Jointer]]
-  * [[craftsman_scroll_saw|Craftsman 103.20720 Scroll Saw]]
+  * [[planer|Planer]]
-  * [[sawstop_table_saw|SawStop PCS175 10” Cabinet (Table) Saw]]
+  * [[scroll_saw|Scroll Saw]]
-  * [[router_table|Rockler SL Router Table with Dewalt DWP611 Router]]
+  * [[table_saw|Table Saw]]
-  * [[hand_planer|Dewalt D26676 Electric Hand Planer]]
+  * [[router_table|Router Table]]
+  * [[drum_sander|Drum Sander]]
+  * [[hand_planer|Electric Hand Planer]]
   * [[routers|Routers]]
   * [[angle_grinders|Angle Grinders]]
   * [[circular_saws|Circular Saws]]
-  * [[drum_sander|SuperMax 16-32 Drum Sander]]
+  * [[bench_grinder_wood_shop|Bench Grinder]]
-  * [[bench_grinder_wood_shop|Manning-Bowman 71510 6” Bench Grinder]]
+  * [[sawzall|Reciprocating Saw]]
-  * (Coming Soon) [[cnc_router|CNC Router (Shapeoko XL 4)]]
+  * [[cnc_router|CNC Router (Shapeoko XXL 4)]]
-  * (Coming Soon) [[band_saw|Ryobi BS904G Band Saw]]
+  * [[band_saw|Band Saw]]
-  * (Coming Soon) [[sawzall|Milwaukee Super Sawzall 6537-22]]
-  * (Coming Later) Lathe
+===Coming Soon===
+  * Lathe