Differences

This shows you the differences between two versions of the page.

--- flsun_q5 [2025/04/23 20:40] – nick_dunne
+++ flsun_q5 [2025/04/25 21:14] (current) – [Troubleshooting] nick_dunne
@@ Line 2: / Line 2: @@
 FDM (fused deposition modleing) 3D printer {{ :flsun_q5.png?400|}}
-The FLSUN Q5 is a compact delta 3D printer known for its user-friendly operation. The printer includes automatic bed leveling with a detachable touch probe, helping ensure consistent first layers and reducing the need for manual adjustments. Its heated glass bed promotes strong adhesion during printing and easy part removal once cooled. Quiet performance is achieved through a 32-bit mainboard and silent stepper drivers, while the touchscreen interface provides an intuitive user experience.
+The FLSUN Q5 is a compact delta 3D printer that is easy for inexperienced users to operate. The printer includes an automatic bed leveling system and a detachable touch probe, which helps ensure consistent first layers. Its non-removable textured glass bed promotes strong adhesion during printing and easy part removal once cooled. The Q5 uses a touchscreen interface that provides an intuitive user experience.
 ===== Machine Specifications =====
@@ Line 66: / Line 66: @@
 ==== Troubleshooting ====
   * **Zero configs imported error:** \\ Make sure you have unzipped the downloaded file before importing.
+  * **The printer isn't reading the SD card:** \\ Format the SD card, and ensure it is formatted as FAT32, not NTFS.
+  * **The printer still isn't reading the SD card:** \\ Retry with another card. (Name brand recommended, generic cards are fickle).
@@ Line 78: / Line 80: @@
 These files are only necessary if the materials are not present in your software. Check back here occasionally for more materials!
-{{ :generic_pla_.zip | PLA Material Bundle}}
-\\
-{{ :generic_petg.zip | PETG Material Bundle}}