Differences

This shows you the differences between two versions of the page.

--- elec_orientation_guide [2025/08/10 18:43] – [General Rules] stan_okrasinski
+++ elec_orientation_guide [2025/08/10 18:57] (current) – [Project Storage] stan_okrasinski
@@ Line 13: / Line 13: @@
 For the purposes of this orientation, the lab is the room that contains electronics, 3D printing, and laser cutting. “Electronics” occupies the space from the table the reflow oven is on to the soldering desk. The table in the middle of the lab is communal space, shared by all sections in the lab.
-(TODO: Add a diagram here)
+{{:electronics-lab.jpg?600|}}
 ===== General Rules =====
@@ Line 25: / Line 25: @@
 Plastic storage shoeboxes are available for project storage. The bins available for project storage are labeled "Project Storage". All space rules must be followed when storing your projects. You must include a project storage label inside the storage bin with your project.
+{{:electronics-proj-store.jpg?400|}}
 ===== Things We Have =====
@@ Line 45: / Line 47: @@
 If there are specific components you need for a project, let me know! If it’s something that’s used a lot, we may be able to stock it. Also, we’re more than happy to accept component donations if you end up with lots of extras after a project.
+=== Project Kits ===
+As available, project kits will be available. Kits are available to space members who would like to do an electronics project, but need some inspiration. There are a few guidelines when using the kits:
+  - Don't harvest parts from a kit for other projects
 ==== Soldering and Repair Equipment ====