Differences

This shows you the differences between two versions of the page.

--- biqu_b1 [2025/05/02 18:53] – nick_dunne
+++ biqu_b1 [2025/05/16 02:46] (current) – [Maintenance Log] nick_dunne
@@ Line 7: / Line 7: @@
   * Type: Fused deposition modeling
   * Motion system: Cartesian
-  * Print volume: 256 x 256 x 256 mm
+  * Print volume: 210 x 220 x 220 mm
   * Max hotend temperature: 350°C
   * Max build plate temperure: 85°C
@@ Line 61: / Line 61: @@
   - In the Orcaslicer, select file > Import > Import configs, and select the .orca_printer file
   - Select the new profile in the "Printer" section. All printers should have the suffix "MAKE Roanoke". You may delete any default printer profiles.
-  - You're ready to slice and print!
+  - Click the wifi symbol near the printer and enter the following information: {{ :biqu_b1_3d_printer_-_how_to_connect.pdf | How to Connect}}
+  - Save!
+  - You should see a login page in the "device tab". Contact the shop captain to verify training and receive login information.
+  - Enter the login and you're ready to print!
 ==== Troubleshooting ====
   * **Zero configs imported error:** \\ Make sure you have unzipped the downloaded file before importing.
-  * **I can't find the X1C access code:** \\ The access code is located on a blue label on the front of the machine.
   * **I can't connect to the printer:** \\ The printer is only accessible on the MKROA network. Ask shop captain for login information. You will need to restart the slicer after switching networks.
+  * **I can't log into the printer:** \\ The login is provided to all members who have completed training on this machine. Contact the shop captain to verify training completion to receive the username and password.
   * **I still can't connect to the printer:** \\ Go to the network and set to "private" rather than "public", and restart the slicer.
   * **I still can't connect to the printer:** \\ If you use a VPN, you may need to turn it off for printer visibility. Some VPNs work fine, others prevent network discovery.
@@ Line 77: / Line 80: @@
 ===== Machine Profile =====
 The machine profile includes configuration files for the printer, as well as print process and material settings.
-Print Profile: {{ :biqu_b1_-_make_roanoke.zip | Biqu B1 3D Printer Profile}}
+\\
+\\
+Printer Profile: {{ :biqu_b1_-_make_roanoke.zip | Biqu B1 3D Printer Profile}}
 ===== Material Profiles =====
@@ Line 89: / Line 94: @@
 ----
+====== Maintenance Log ======
-====== Connection ======
+  * __**5/15/2025: Service Entry Preparation**__
+      * Updated Octoprint to latest release
-**IP Address:** 10.20.1.16
+      * Installed auto-shutdown plugin
-\\
+      * Adjusted web UI for enhanced clarity
-**API Key:** AA48AD025C7145C4A04083EDD57678CD
+      * Applied high-contrast theme
+      * Ran mesh leveling script
+      * Created Octoprint backup and saved to google drive (board)