Differences

This shows you the differences between two versions of the page.

--- bambu_lab_x1c [2025/05/16 02:35] – [Maintenance Log] nick_dunne
+++ bambu_lab_x1c [2026/01/16 21:53] (current) – [Maintenance Log] nick_dunne
@@ Line 1: / Line 1: @@
 ====== Bambu Lab X1 Carbon ======
+**Printer Name:** Printy McPrintface
 FDM (fused deposition modleing) 3D printer with AMS (automatic material system) {{ :x1cwams.png?400|}}
@@ Line 64: / Line 66: @@
   - In the Orcaslicer, select file > Import > Import configs, and select the .orca_printer file
   - Select the new profile in the "Printer" section. All printers should have the suffix "MAKE Roanoke". You may delete any default printer profiles.
+  - Select the process preset in user presets ending in "MAKE Roanoke"
   - You're ready to slice and print!
@@ Line 82: / Line 85: @@
 {{ :bambu_lab_x1_carbon_0.4_nozzle_-_make_roanoke.orca_printer.zip | Bambu Lab X1 Carbon Profile}}
-===== Material Profiles =====
-The material profiles include per-material settings including temperature, speeds, and shrink rates.
-These files are only necessary if the materials are not present in your software. Check back here occasionally for more materials!
-{{ :generic_pla_.zip | PLA Material Bundle}}
-\\
-{{ :generic_petg.zip | PETG Material Bundle}}
 ----
 ====== Maintenance Log ======
+  * __**1/16/2026**__
+      * Replaced z-axis idler pulley
+      * Perform z-axis belt timing procedure
+      * Trammed build plate
+      * Cleaned and lubricated z-axis threaded rods, and y-axis rods
+      * Cleaned x-axis carbon rods with IPA, removed carbon dust
+      * Vacuumed bottom tray from debris
+      * Cleaned glass panels
   * __**5/15/2025: General Maintenance**__