Differences

This shows you the differences between two versions of the page.

--- 3d_printing [2025/05/23 15:04] – [Resin Printer (SLA/DLP) Policy] nick_dunne
+++ 3d_printing [2026/06/19 22:00] (current) – [Shop Policy] nick_dunne
@@ Line 8: / Line 8: @@
 ====== Shop Announcements ======
-  * **5/22/25:** Elegoo resin printers are now available for training and use!
+  * **1/10/2026: New equipment available!**
+    * Bambu Lab P1S - ready for use! Thank you to our generous members who helped purchase this machine!
+    * Elegoo Saturn 3 - The Saturn 3 has been repaired and is now in service. Thank you @sokrasins and @remcha!
+  * **6/12/2025: New equipment and materials available!**
+    * Creality Space Pi X4 Filament Dryer
+    * Filament storage vacuum bags & pump
+    * Community PETG- multiple colors
+    * Scribe3D 3D pen
+  * **5/22/2025:** Elegoo resin printers are now available for training and use!
 ===== General Lab Safety =====
@@ Line 34: / Line 46: @@
   - __Cleanup is mandatory__ - Remove supports, scraps, drips, and other debris from all machinery and work areas when finished. Failure to do so may damage machinery and other tools. This rule also applies to communal work surfaces inside and outside of the main 3D print lab.
   - __Material use__ - While the 3D printing lab will attempt to keep a limited supply of communal materials, it cannot guarantee material availability. Members are encouraged to supply their own filaments and resins. Materials owned by MAKE Roanoke may not be borrowed or taken from the shop under any circumstances.
-  - __Print scheduling__ - Any prints over 8 hours must be scheduled in advance. If print jobs are not started within 15 minutes of the scheduled start time, the reservation is forfeited. Printers may be used any time, as long as there are no reservations scheduled in the machine booking sheet.
   - __No printer modifications__ - All maintenance tasks are coordinated by the shop captain and/or their appointed delegates monthly. Contact the shop captain if maintenance is needed sooner.
   - __Turn off all equipment when finished__ - All equipment should be fully powered off when not in use. This includes printers, washing stations, filament dryers, ventilation equipment, work lights, UV lamps, and any other electronic equipment.
@@ Line 106: / Line 117: @@
   * [[bambu_lab_x1c| Bambu Lab X1 Carbon + AMS]] {{ :x1c.png?600|}}
-  * [[biqu_b1| Biqu B1]]
+  * [[bambu_lab_p1s| Bambu Lab P1S + AMS]]
   * [[flsun_q5| FLSun Q5]]
-**Coming Soon:**
-  * Ender 3 Pro
-  * Voron 2.4
-  * Lulzbot Taz 6
-  * Lulzbot Taz Mini
 ----
@@ Line 131: / Line 133: @@
   - __Manage contamination__ - Every effort must be made to limit resin contamination. Plastic trays are available for use when post-processing finished prints. Gloves should be changed if they are excessively contaminated.
   - __Cleaning is mandatory__ - Printers must be emptied of leftover resin after every use. Build plates must also be cleaned with alcohol after each use. Use a filter funnel to return all unused resin from the resin vat to its original container. Use a **plastic** scraper to genty squeegee resin from the vat film. Isopropyl alcohol should be used to clean the build platform and the resin vat. Proper cleaning procedure is covered during certification training.
-  - __**Absolutely no resin or resin-contaminated alcohol should go down the sink**__ - A chemical waste storage bucket is available for safe disposal of alcohol and degraded resins.
+  - __**Absolutely no resin or resin-contaminated cleaners should go down the sink**__ - A chemical waste storage bucket is available for safe disposal of alcohol and degraded resins.
-  - __Use only printer-compatible materials__ - Some engineering-grade resins cannot be printed on our machines, since they require heated vats.
+  - __Use only printer-compatible materials__ - Some engineering-grade resins cannot be printed on our machines, since they require heated vats or stirring.
   - __Finished prints__ - Finished prints must be removed within 1 hour of completion for post-processing. Members are encouraged to let prints drip for 30 minutes to reduce washing effort and IPA contamination.
-  - __Use resin-specific hand tools__ - Tools used for resin post-processing should not leave the resin printing station, in effort to contain residue. Tools from other areas in the shop may not be borrowed. These tools are marked with yellow bands or labels, and belong in the yellow bin.
+  - __Use resin-specific hand tools in the yellow bucket__ - Tools used for resin post-processing should not leave the resin printing station, in effort to contain residue. Tools from other areas in the shop may not be borrowed. These tools are marked with yellow bands or labels, and belong in the yellow bin.
@@ Line 158: / Line 160: @@
   * [[elegoo_mercury_wash_cure_station| Elegoo Mercury X Wash & Cure Station]]
   * [[sunlu_s1| Sunlu S1 Filament Dryer]]
+  * [[creality_space_pi_filament_dryer| Creality Space Pi X4 Filament Dryer]]
 ----