3d_printing
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |||
| 3d_printing [2026/03/02 20:39] – [FDM Printers] nick_dunne | 3d_printing [2026/06/19 22:00] (current) – [Shop Policy] nick_dunne | ||
|---|---|---|---|
| Line 46: | Line 46: | ||
| - __Cleanup is mandatory__ - Remove supports, scraps, drips, and other debris from all machinery and work areas when finished. Failure to do so may damage machinery and other tools. This rule also applies to communal work surfaces inside and outside of the main 3D print lab. | - __Cleanup is mandatory__ - Remove supports, scraps, drips, and other debris from all machinery and work areas when finished. Failure to do so may damage machinery and other tools. This rule also applies to communal work surfaces inside and outside of the main 3D print lab. | ||
| - __Material use__ - While the 3D printing lab will attempt to keep a limited supply of communal materials, it cannot guarantee material availability. Members are encouraged to supply their own filaments and resins. Materials owned by MAKE Roanoke may not be borrowed or taken from the shop under any circumstances. | - __Material use__ - While the 3D printing lab will attempt to keep a limited supply of communal materials, it cannot guarantee material availability. Members are encouraged to supply their own filaments and resins. Materials owned by MAKE Roanoke may not be borrowed or taken from the shop under any circumstances. | ||
| - | - __Print scheduling__ - Any prints over 8 hours must be scheduled in advance. If print jobs are not started within 15 minutes of the scheduled start time, the reservation is forfeited. Printers may be used any time, as long as there are no reservations scheduled in the machine booking sheet. | ||
| - __No printer modifications__ - All maintenance tasks are coordinated by the shop captain and/or their appointed delegates monthly. Contact the shop captain if maintenance is needed sooner. | - __No printer modifications__ - All maintenance tasks are coordinated by the shop captain and/or their appointed delegates monthly. Contact the shop captain if maintenance is needed sooner. | ||
| - __Turn off all equipment when finished__ - All equipment should be fully powered off when not in use. This includes printers, washing stations, filament dryers, ventilation equipment, work lights, UV lamps, and any other electronic equipment. | - __Turn off all equipment when finished__ - All equipment should be fully powered off when not in use. This includes printers, washing stations, filament dryers, ventilation equipment, work lights, UV lamps, and any other electronic equipment. | ||
3d_printing.txt · Last modified: by nick_dunne