Differences

This shows you the differences between two versions of the page.

--- lathe_dro [2025/10/24 18:58] – samantha_sullivan
+++ lathe_dro [2026/03/13 09:28] (current) – chris_santacroce
@@ Line 8: / Line 8: @@
   - Unplug the adapter power supply.
   - Open the Bluetooth settings on your device.
-  - Plug in the adapter, and look for "HC-05" to appear on the "Available Devices" list on your device.
+  - Plug in the adapter, and look for "TouchDRO" to appear on the "Available Devices" list on your device.
   - Pair with the adapter (code is 1234, I have the same code on my luggage).
   - Open the TouchDRO app on your device. A "Select a TouchDRO Adapter" dialog should pop up. If it doesn't, tap the Bluetooth icon at the top of the screen.
-  - Select "HC-05".
+  - Select "TouchDRO".
   - You're connected!
@@ Line 24: / Line 24: @@
   - Scroll down, and tap "Z Axis Settings" If it's not enabled, enable it.
   - Scroll down to "Primary Input", and tap "Resolution"
-  - In the "Set Z Axis CPI" dialog, enter 2560.0, and tap OK.
+  - In the "Set Z Axis CPI" dialog, enter 5084.25, and tap OK.
   - Tap the back button twice to return to the readout display.
   - Test things by moving the lathe carriage back and forth; The numbers on the display should change accordingly.