Differences

This shows you the differences between two versions of the page.

--- bambu_lab_x1c [2026/01/10 05:33] – [Maintenance Log] nick_dunne
+++ bambu_lab_x1c [2026/02/21 00:08] (current) – [Maintenance Log] nick_dunne
@@ Line 89: / Line 89: @@
 ====== Maintenance Log ======
-  * __**TO-DO**__
+  * __**2/19/2026**__
-      * Replace z-axis idler pulley
+      * **Equipment Failure:** Extruder PTFE tube failure resulted in broken hotend
+      * {{:img_0108.jpg?200|}} {{:img_0110.jpg?200|}}
+      * **Root cause:** Abraded PFTE tube ruptured during spool jam (warped plastic spool)
+      * **Solution:** PTFE tube and hotend replaced by Jason
+  * __**1/16/2026**__
+      * Replaced z-axis idler pulley
       * Perform z-axis belt timing procedure
-      * Clean and apply new lubricant to z-axis rails and leadscrews
+      * Trammed build plate
-      * Clean carbon rods with alcohol
+      * Cleaned and lubricated z-axis threaded rods, and y-axis rods
+      * Cleaned x-axis carbon rods with IPA, removed carbon dust
+      * Vacuumed bottom tray from debris
+      * Cleaned glass panels
   * __**5/15/2025: General Maintenance**__