Metrology Equipment

Metrology Equipment are Yellow Level Tools and are unlocked after Metal Shop Orientation

1. Handle all measuring instruments with care to prevent damage
2. Store instruments in protective cases when not in use
3. Maintain a clean environment for storage
4. Keep instruments away from moisture, dust, and extreme temperatures

1. Select the appropriate instrument for the measurement task
2. Clean measuring surfaces before and after use
3. Follow manufacturer's operating instructions
4. Apply consistent measuring force when using contact instruments
5. Allow temperature stabilization between instrument and part
6. Take multiple measurements for verification
7. Report inaccurate or out-of-calibration equipment to Shop Captain.

1. Perform regular visual inspections for damage or wear
2. Clean instruments according to manufacturer recommendations
3. Lubricate moving parts as specified
4. Check batteries and power supplies regularly
5. Verify zero settings before measurements
6. Perform periodic performance checks between calibrations