FDM (fused deposition modleing) 3D printer

The FLSUN Q5 is a compact delta 3D printer that is easy for inexperienced users to operate. The printer includes an automatic bed leveling system and a detachable touch probe, which helps ensure consistent first layers. Its non-removable textured glass bed promotes strong adhesion during printing and easy part removal once cooled. The Q5 uses a touchscreen interface that provides an intuitive user experience.

• Type: Fused deposition modeling
• Motion system: Delta
• Print volume: Ø200 x 200 mm
• Max hotend temperature: 270°C
• Max build plate temperure: 100°C
• File transfer: Micro SD card

• PLA
• PETG
• TPU

Official FLSun Wiki

All members must use Orcaslicer and profiles that are provided by MAKE Roanoke. This is important for ensuring the community has access to printers that are easy to use, ensuring machine longevity, and producing high-quality prints. Printing settings may be adjusted as needed, but machine settings may NOT be edited. Orcaslicer is a feature-rich and highly compatible slicer that is updated often with new features.

Orcaslicer is compatible with Windows, Mac, and Linux.

Orcaslicer Website: https://orcaslicer.com/
Orcaslider Github: https://github.com/SoftFever/OrcaSlicer

Please use the links above. Scam sites have been reported using similar URLs.

The following procedure applies if setting up Orcaslicer for the first time.
If you have previously installed other machines, skip to step 4 below.

1. Launch Orcaslicer
2. Set Region
3. Install default profile for the machine you want to use in the “printer” section (it takes a bit to load)
4. If prompted to install the Bambu Network Plugin, select YES
5. Download the file in “Machine Profile” below
6. Unzip/Extract the downloaded file. You should see a file with the extension .orca_printer
7. In the Orcaslicer, select file > Import > Import configs, and select the .orca_printer file
8. Select the new profile in the “Printer” section. All printers should have the suffix “MAKE Roanoke”. You may delete any default printer profiles.
9. You're ready to slice and print!

• Zero configs imported error:
  Make sure you have unzipped the downloaded file before importing.
• The printer isn't reading the SD card:
  Format the SD card, and ensure it is formatted as FAT32, not NTFS.
• The printer still isn't reading the SD card:
  Retry with another card. (Name brand recommended, generic cards are fickle).

The machine profile includes configuration files for the printer, as well as print process and material settings.

FLSun Q5 Profile

The material profiles include per-material settings including temperature, speeds, and shrink rates. These files are only necessary if the materials are not present in your software. Check back here occasionally for more materials!