======Lathe Tooling======

====Tool Holding====
  * 0XA Wedge-type toolpost on Solid Toolpost Block (Compound slide stored behind lathe)
  * 1/2" max tool shank regular holders
  * 3/8" or 10mm diameter boring bar holder
  * 1/2" parting blade holder

====Tail Stock Tooling====
  * Quill taper is Morse Taper 2 (MT2)
  * Live center (small and large)
  * Drill Chuck (1/2" max drill bit shank)

====Work Holding====
  * 3-jaw scroll chuck
    * Inside and Outside Jaws
    * 0.080" min, 4.0" maximum clamping
  * 4-jaw independent chuck
    * Reversible Jaws
    * 0.080" min, 4.0" maximum clamping