Table of Contents
Lathe Tooling
Tool Holding
Tail Stock Tooling
Work Holding
Lathe Tooling
Tool Holding
BXA Wedge-type toolpost on Solid Toolpost Block (Compound slide stored behind lathe)
1/2“ max tool shank regular holders
5/8” - 3/4“ diameter boring bar holder
1/2” parting blade holder
Tail Stock Tooling
Quill taper is Morse Taper 3 (MT3)
Live center (with interchangeable tips)
Drill Chuck (1/2“ max drill bit shank)
Work Holding
3-jaw scroll chuck
Reversible Jaws
Remove 2 bolts from each jaw to remove
Jaws are numbered, please don't mix them up
4-jaw independent chuck
Reversible Jaws
Unscrew each jaw all the way, flip, reinsert.
DokuWiki Appliance
- Powered by
TurnKey Linux